5500 Ton Dieffenbacher Press

Contact An Agent

ONE PREOWNED 5500 TON DIEFFENBACHER HYDRAULIC PRESS, NEW 1990

SPECIFICATIONS:

Capacity-Tons (gross) 50,000 kN (5500 Ton, US)
Stroke 2100mm (82.67”)
Daylight 3200mm (126”)
Bed & Ram 2450mm x 4000mm (160” x 96”)
4-Main Cylinders-Each 800mm (31.5”)
2-Pullback Cylinders-Each 280mm (11”)
4-Counter Action Breakaway Cylinders 480mm (18.9”)
Programmable Closing Speed Up To 1000mm/sec (2362 IPM)
Pressing 1-40mm/sec (1-96 IPM)
Return 500mm/sec (1180 IPM)
Mold break-away force through counter-acting cylinders (gross) 12,000kN (1333 Tons)
Pull-back force, gross (160 bar) 1900kN (210 Tons)
Free pull-back force (max mold weight on top) at a return speed
of 500 mm/s 600kN (66 Tons)
Cross Shaped Ejector in press side:
Ejector force max, approximate 500kN (45 Tons)
Ejector max, approximate 200mm (7.9”)
Pump delivery rating max at hp, approximate 2×280/510 1/min (2×216/134 GPM)
Drive rating approximate 630kW (630kW)
Connected power rating approximate 800kW (800kW)
Power Supply 460 V threephase 60Hz
Height above floor, approximate 11,000mm (433.4”)
Sliding table track level above floor 50mm (1.96”)
Height below floor approximate 3300mm (130”)
Total Weight 610 Tons
Dimensions of single largest component 5600x5200x3100mm (220”x205”x120”)
Weight of heaviest single component approximate 140m. tons (155 tons)

EQUIPED WITH:

Dual Rolling Bolster- Left and Right
Intelligent Leveling

CONDITION: Very Good to Excellent. Last used for testing of materials.
LOCATION: Disassembled-In Storage-USA

 

Stk#2540CE